BXProject

Right so.
I'll go nick some.

like to see you hide that down your keks

actually I wouldent

There aint space down there for anything else mate!

I'll just go ask, they'll not give a toss, and I'll shove some in the bus and bring it home!

I assume it's this stuff you're after Vanny........ it's only 1.7m x 60mm but if it's of any use you're welcome to it mate

Do you remember that flexible 2" stainless pipe I had from the farm Vanny? sounds like the stuff smiffy described. I have about a metre of it, which may do to jubilee on your exhaust and then into a home made box with extractor fan fitted (which I have and can donate! 240V AC) then out of box and into that tumble dryer extraction concertina type hose (also available from bandit spares!). The only issue I can think of is the water vapour condensing so a little drain hole might be a good idea and not to have the fan at the lowest point. I also have the 60mm (ish) stainless tube (solid tube mind) you gave me for the intercooler conversion which I've not done and don't intend to.

Bandit, its not unrealistic to see 100c + from the exhaust, and as you need a draw flow you need at least 100% extra over the outlet, so for my 60mm tail i need 80 to 100mm exhuast. My problem isn't girth, but rubber. I want something to ensure my chrome tail dont get sctrached I also need flexibility because i dont want to scratch the exhaust. Docco's 100mm flexi is a good start mind, just need some high temp silicone

Vanny wrote:My problem isn't girth, but rubber.

I have the same problem...

Cheers muchly for the pipe by the way, you shall be suitably rewarded!

Ah I see now Vanny - why didn't you say so in the 1st place?

Ahh, then what you need is an "exhaust cone" rubberised doobery thing we have on the extractors in work.
I'll nickone of them aswell if you like.
Sinc the whole fucking company is being made redundant, I doubt any cunt will notice, since there wont be anybody left to notice!

christ, if you can get one of them i'd be well happy mate, i cant find em second hand or at a decent price, typically they want to sell the whole kit and caboodle to you.

I'll nick one, they have done plenty to fuck me off in the last week, but do remember that they are for 3-5 inch diameter exhaust pipes!

doesnt matter smiffy, you need them to be loose to create a draw as i wont be adding a fan. Just need to steal a top hat and cowl from my uncles place and i'll have the whole lot for free.