BX bringing you down? just don't have the right spanner? perhaps our counselors can help . . . actually i doubt it, but ask anyway!
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 09 Oct 2008
cant find the stop solenoid on me xm
have got the two plastic covers and assorted pipes off the pump
was expecting to see it stickin out but its nowhere too be seen
seems to be two sort of casing things that it might be in
ones in the middle of where the 4 fuel pipes go out
and ones at the back near the glow plug in de pic
sooooooo
any ideas
![Image](http://i116.photobucket.com/albums/o40/bxbertie/xmmmm002.jpg)
-
Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Post
by Bx Bandit » 09 Oct 2008
Oh so that's why you were phoning!! Sorry mate, I've been outside doing me decking. Dunno is the short answer cos I've never delved that far into the Xantia...
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Post
by Bx Bandit » 09 Oct 2008
This mean anything? Apart from that mate,I'm none the wiser. It must surely be under that black thing with all the wire things....?
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 10 Oct 2008
confusion reigns eh
i found this but it doesnt look like the epic i got
info is on p28/29
http://www.volkscity.co.uk/Files/ENGINE ... DIESEL.pdf
the two likeliest places i could see on my pump is highlighted 746 red on bandits thing and 760 red
but the bits shown dont look like the stop solenoid i got
hmmmmm
![Confused :?](./images/smilies/icon_confused.gif)
-
docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
-
Contact:
Post
by docchevron132 » 15 Oct 2008
Sorry for the delay dude, I' missed this completley!
746 looks about right, but the exploded diagram is not the clearest, by which I mean 746 looks ABOUt right, but the srawing is not quite what it actually looks like, but following the little line things then thats where it should be, if that makes any sense?
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 15 Oct 2008
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 15 Oct 2008
and i just remembered me self
need to ask u again
u mentioned that u might be able to get me this relay
http://www.bxproject.co.uk/forum/viewtopic.php?t=1807
cause if not i'll order one from the usa/newarks
its the only place that i can find a relay with the diode
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
:roll::roll:
-
docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
-
Contact:
Post
by docchevron132 » 16 Oct 2008
Oh shit, yeah, sorry dude, forgot all about it.
I'll get on to it ASAP.
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 19 Oct 2008
why does everything on this fuckin car get so difficult
am trying to get the new stop solenoid but its another fuckin mission
all the motor factors ive tried can only supply the same, wrong stop solenoid that ive got already
the local lucas place went out of business two weeks ago
another so called local expert said that you cant buy them separate and he said that it was the pointy bit
at 760
need to get this car sorted but its painfully slow work
![WTF? [wtf]](./images/smilies/wtfmore.gif)
-
Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Post
by Bx Bandit » 19 Oct 2008
Have you tried the main stealer????
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
-
Contact:
Post
by docchevron132 » 21 Oct 2008
Erm, but from following the line on the drawing 760 goes through the end plate and therefore must be the fuel limiting trigger?
The two EPIC pumps (one on an XM and one on a Xantia as it goes) I've stripped had the stop solonoid above the injector pipe output ports which was accessible after removing the plastic end shields.
They WERE available seperatley, I know his cos I replaced one about a year or so ago.
Albeit Lucas going to the wall may have fucked things up, but then lLSUK were only really suppliers and made very little anyway.
I'll ask Manny tomorrow and see if he's got a pump laying around I can rob.
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 21 Oct 2008
cheers doc
ive got a few more numbers to phone for the stop solenoid but so far its all been no
will now try citroen themselves next and see what they say
sat with the bandit and his furry walnuts yesterday and did some cross referencing we reckoned the piece is at 690
but might as well be stuck up the atric monkeys arse if i cant find a replacement
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
:roll:
-
Way2go
- GET OUT MORE
- Posts: 4577
- Joined: 21 Nov 2006
- Location: By a flaky computer
Post
by Way2go » 21 Oct 2008
You cross referenced the Bandit's furry walnuts ?
![vomit [vomit]](./images/smilies/vom.gif)
1991 BX19GTi Auto
-
Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Post
by Bx Bandit » 21 Oct 2008
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 22 Oct 2008
![Laughing :lol:](./images/smilies/icon_lol.gif)
:lol::lol::lol:
stop making me laugh
this a very serious thread
i only mentioned bandits furry walnuts cause.......
cause......
oh fuck off
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
:roll:
-
Philhod
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
-
Contact:
Post
by Philhod » 22 Oct 2008
![hmmm [chin]](./images/smilies/scratch_chin.gif)
Never had one of these apart but from the schematic, it looks like the unit in line with and to the left of, O ring 746.
or not!
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
-
Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Post
by Bx Bandit » 22 Oct 2008
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
Way2go
- GET OUT MORE
- Posts: 4577
- Joined: 21 Nov 2006
- Location: By a flaky computer
Post
by Way2go » 22 Oct 2008
1991 BX19GTi Auto
-
Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Post
by Bx Bandit » 23 Oct 2008
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Post
by charlie » 23 Oct 2008
yeah but its not me having the breakdowns its the bloody xm
i just throw the toys out of the pram
and then the pram against the wall
then demolish the wall
then grind it all to dust
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
:twisted::twisted:
therapy, therapy and more therapy
![Very Happy :D](./images/smilies/icon_biggrin.gif)