-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: The time is now
No that is in fact the cage. The race is the track on which the balls?needles revolve.
I certainly am mate. Nice uneventful journey for once. Caught the 8-04 from kalmar to Alvesta. 15 minute wait for the X2000, (posh train coming from Stockholm) arriving at Kastrup (Köpenhamn airport) 11-30.
Plane was 40 mins late, 10 past 3, but was down in Manchester at just after 4 and home by 10 past 5, so good result all round really.
Can't believe the snow we had. It's the worst they have had for over 10 years.
Will eventually get some pics up on here (new years resolution)
I certainly am mate. Nice uneventful journey for once. Caught the 8-04 from kalmar to Alvesta. 15 minute wait for the X2000, (posh train coming from Stockholm) arriving at Kastrup (Köpenhamn airport) 11-30.
Plane was 40 mins late, 10 past 3, but was down in Manchester at just after 4 and home by 10 past 5, so good result all round really.
Can't believe the snow we had. It's the worst they have had for over 10 years.
Will eventually get some pics up on here (new years resolution)
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
Cheers bandit, that makes some sence. It would explain why the bolt was snapped. Unfortunately while i was told i had to remove the AC setup myself, i arrived to find most of the AC system removed from the donor valver and i still have parts i'm not strictly sure where they belong! It would also explain why the bolt is snapped if it is left handed!
Hmmm, i've never undone the M8 side, so the idler and bolt/stud and nut are all still firmly attached!
Hmmm, i've never undone the M8 side, so the idler and bolt/stud and nut are all still firmly attached!
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: The time is now
In theory then, you can transplant onto my bolt
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: The time is now
There are too many connotations in that sentanceIn theory then, you can transplant onto my bolt
It was for the very reason you state Vanny, that I insisted my team strip out any 2nd hand stuff we got from other companies.
We got 3 boxes of electronics once. nothing to do with the machine we bought, but we lost 3 days finding that out.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: The time is now
You jammy bastard Vanny, I found the bolt this very evening - I thought it would of been a needle in a haystack job.
I tried to remove as much connotation as possible Phil! Some were inevitable!!!
I tried to remove as much connotation as possible Phil! Some were inevitable!!!
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
erm, i think we might be barking up the wrong tree lads, took the assembley appart;
Both threads are 'normal' right handers!
Both threads are 'normal' right handers!
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: The time is now
Oooh, that looks awfully familiar to the idler on the "lollipop" style tensioner on later XU's..
EDIT: come to think of it, are you sure thats actually off the BX?
I've never seen a BX with AC with that style roller.
EDIT: come to think of it, are you sure thats actually off the BX?
I've never seen a BX with AC with that style roller.
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
YES it's off the BX but it is ONLY fitted to the 16v with factory fit AC.
The idler its self is like £114 from Citroen so i suspect many people do away with it for something less expensive. But me, i want it right!
The idler its self is like £114 from Citroen so i suspect many people do away with it for something less expensive. But me, i want it right!
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: The time is now
Ooooh yeah, that be different awl right. That's an eccentric tensioner style no? They have similar (don't know about size, but identical 'sort' of thing) tensioner on the 2.1 XUD aux belt. Could be a cheaper option? The bolt looks good to make on a lathe....
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
And Viola!
The start of the new bolt. Which i'd taken the old one mind, this'n is about 10mm too short on the thin end. There is the slightest amount of play from bolt to thread, but i'm confident it will be okay!
Now, the nut in the middle, i think i'm best to use the old bolt, cut the nut off, dril it, tap it, screw it on and spot it in place, and dress it. Sound like a plan?
Also, alternator is in the post, whoop!!
The start of the new bolt. Which i'd taken the old one mind, this'n is about 10mm too short on the thin end. There is the slightest amount of play from bolt to thread, but i'm confident it will be okay!
Now, the nut in the middle, i think i'm best to use the old bolt, cut the nut off, dril it, tap it, screw it on and spot it in place, and dress it. Sound like a plan?
Also, alternator is in the post, whoop!!
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: The time is now
Would a standard nut do instead? To save drilling tapping?
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
well it needs to be pretty close to the engine block, it acts as a spacer, and i think if i don't have the right space the belt wont be supported correctly and eventually it will fail prematurely.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: The time is now
You can get 1/4, 1/2 and 3/4 nuts from engineers suppliers. All nuts are made to a formula, the depth is proportionate to the diameter with a cham on one side.
Locknuts come with a chamfer on both sides and in the proportions given above as well as full size. Measure your spacer then get the size above and grind/ file it to the thickness you want.
Locknuts come with a chamfer on both sides and in the proportions given above as well as full size. Measure your spacer then get the size above and grind/ file it to the thickness you want.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: The time is now
Well by the previous 2 posts I assumed it was either missing or fubar.
While I'm on. I have just downloaded all my christmas pics from my phone. That Pixum site is shite and I was wondering where the best place to stick all my photo's is?
Any recommendations? And please, somewhere where there are no issues with transporting them onto here and elsewhere
While I'm on. I have just downloaded all my christmas pics from my phone. That Pixum site is shite and I was wondering where the best place to stick all my photo's is?
Any recommendations? And please, somewhere where there are no issues with transporting them onto here and elsewhere
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: The time is now
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
Phil, I'd second photofuckit you post hijacking troll.
I thought you had a photoborkedit account?
I thought you had a photoborkedit account?
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
Forking buggery, alternator has arrived, £35 delivered, but its not right. The eBay advert lists is as a 70Amp LRA00471 reman. Its reman and LRA00471 alright, but its a fucking bastarding buggering 50amp alternator, according to both the interwebs and Lucas websites.
COCK!
Should have been LRA00764 for an 80a. Cockit.
COCK!
Should have been LRA00764 for an 80a. Cockit.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: The time is now
That's me I'll set one up then.Phil, I'd second photofuckit you post hijacking troll.
The clue may have been in the price. I got a delco one for my BX about 8 years back. £78 then but it purports to be 90AH.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: The time is now
eBay, the oracle on correct prices? I think not my friend. Somethings are very cheap somethings are very expensive, but it does not make for a yard stick!Philhod wrote:The clue may have been in the price.