BXProject

[Vanny]

Go have a look for yourself;

[Father Ted]

And did it go bang?

[Vanny]

nargh, i'd need to trap all the gas.

[Philhod]

They used to do an electrophoretic paint to stop electrolysis between two dissimilar metals.
Like when you had aly trim round wheelarches (I know, it's a long time ago)

They used to remove it, doing what you are doing. never heard of it as a rust shifter though!

[Bx Bandit]

I have a spare head lamp adjuster bolt if you want one Vanny, comes hydrogen and thus explosion free!

[Vanny]

i've several sets (thanks doc) so should be okay, but though i'd give it a go. Bigger bucket and a wishbone next!

[mat_the_cat]

Have you got one big enough for an LT35?

[Vanny]

hmmm, there is a soak pit at MIRA that an LT35 would fit

[jayw]

Have you got one big enough for an LT35?

Isn't it just the rust holding that together though Matty...

[mat_the_cat]

Git.
It's a lot more solid now than it was I'll have you know! But it's getting into the seams that's difficult. I have managed to get in with a fine wire brush till they are shiny, and then an acid rust converter to get even further in. That has worked for a couple of years now without coming back through, but I've still got t'other side to do...

[Philhod]

You don't need to wire brush that hard actually mat. A quick rub and bang any loose stuff off, then on with the Kurust. A good coat of that then a good etching primer and it will last you forevah................

...............Well, a long time anyway

[Stinkwheel(Matt)]

Id just like to say.................

Lets play...... BXP-Wang (much more fun than numberwang)

[mickey taker]

Why not, most people think we are a bunch of wangers anyway

[Philhod]

You can't play that in China. There are so many wongs and wangs you would always get the wong number.