- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: fogs to be
true, but Bandit does so love welding..
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: fogs to be
A true convert of my teaching
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Re: fogs to be
been messing with de sticky stuff again
so found these pics of removing bx rusty metal and sticking in new welsh steel
done this a while ago and its stayed together
but i need to do a small paint jobbie next to it
so off its come again
so found these pics of removing bx rusty metal and sticking in new welsh steel
done this a while ago and its stayed together
but i need to do a small paint jobbie next to it
so off its come again
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Re: fogs to be
hmmmmmmmmmmmmmmmmmmmmmm
if u havent noticed but
ive be messing with headlamps
and and and
but but but but
soooooooooooooooooooooo
wot i have noticed is the wear inside the actual main headlamp casing
soooooooo like the fog lamps, the surface seems to corrode and the shiney stuff falls out
i ve open up 4 sets of lights now and they all have gone in these areas
this image is from a wedge section that runs down the side
the whole lamp seems to work as a hall of mirrors that reflect the light so any loss leads to poor visabitity/brightness
but what ive noticed as well
is that some lamps are in better overall condition as well
i
soooooooo i reckon that that well known moan that some people make about bx headlamps being poor
is linked to the state of this (and their own) inner coating
and cause im that sort of guy
i use this
which the xm oaps introduced me to Aluminim Foil Tape Code: N46CF
the big stuff at £5.49
http://www.maplin.co.uk/Module.aspx?ModuleNo=4098
ive used it before to patch up exterior xm trim so it stick like fack
and now felloow travellers
a cure
if u havent noticed but
ive be messing with headlamps
and and and
but but but but
soooooooooooooooooooooo
wot i have noticed is the wear inside the actual main headlamp casing
soooooooo like the fog lamps, the surface seems to corrode and the shiney stuff falls out
i ve open up 4 sets of lights now and they all have gone in these areas
this image is from a wedge section that runs down the side
the whole lamp seems to work as a hall of mirrors that reflect the light so any loss leads to poor visabitity/brightness
but what ive noticed as well
is that some lamps are in better overall condition as well
i
soooooooo i reckon that that well known moan that some people make about bx headlamps being poor
is linked to the state of this (and their own) inner coating
and cause im that sort of guy
i use this
which the xm oaps introduced me to Aluminim Foil Tape Code: N46CF
the big stuff at £5.49
http://www.maplin.co.uk/Module.aspx?ModuleNo=4098
ive used it before to patch up exterior xm trim so it stick like fack
and now felloow travellers
a cure
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: fogs to be
Pretty smart that Charlie. If you clean and treat any rusty bits there is a very convincing chrome spray available now, from Plastikote. Attaches well to plastic too.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Re: fogs to be
im on a lightin road to hell
the light is defused by a wire mesh surround
project xm side light is on the go again
the light is defused by a wire mesh surround
project xm side light is on the go again
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Re: fogs to be
and and and and and
im learnin weldin off a mate
my god the bx is sooooooooooooooooooo gonna suffer
im learnin weldin off a mate
my god the bx is sooooooooooooooooooo gonna suffer
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: fogs to be
Bandit I presume
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: fogs to be
Fuck me FT, Bacofoil 5 meters thick???????
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: fogs to be
And I thought the Turkeys were tough
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: fogs to be
Actually I'm not into meat that much. I'm not a veggie but I won't eat anything with bones in it. Apart from fish which I eat all types, whether the bones are still there or not
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Scarecrow
- New Member
- Posts: 141
- Joined: 25 Jul 2010
- Location: Purgatory
Re: fogs to be
What's wrong with bones? At least you know it's meat then
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: fogs to be
meat is murder, apparently. Dont touch the stuff myself, for many reasons which no-one would give a flying about..
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
Re: fogs to be
Fixed!docchevron132 wrote:meat is delicious!
They say an apple a day keeps the doctor away...
but now that most of them are muslim, I find bacon and sausages work better!
but now that most of them are muslim, I find bacon and sausages work better!
- Scarecrow
- New Member
- Posts: 141
- Joined: 25 Jul 2010
- Location: Purgatory
Re: fogs to be
smiffy wrote:Fixed!docchevron132 wrote:meat is delicious!
Yes - that does seem more appropriate
if meat is murder then cake is suicide
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Re: fogs to be
right you bitches......
where to start
hmmmmmmmmmmmmmmm
all ready go on
clear or yellow
???????
where to start
hmmmmmmmmmmmmmmm
all ready go on
clear or yellow
???????
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
Re: fogs to be
and............
do you like me weldin............
bit rough and ready but done and dusted
do you like me weldin............
bit rough and ready but done and dusted