- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
stem seals
been playing about cleanin every thing today and was lookin at the stem seals on the xm
is it worth replacing them and how the fuck do they come off
is it worth replacing them and how the fuck do they come off
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
Last time I had a citroen cylinder head that far to pieces, was a few years back when I re-built the engine on my ZX 1.9i.
I found difficulty in getting the old stem seals off, as they live in a very deep recess, and at that time, I didn't have very long nose pliers in my tool kit!
Putting the new ones back in, was easier, I used a deep reach socket and a very small hammer.
john s
I found difficulty in getting the old stem seals off, as they live in a very deep recess, and at that time, I didn't have very long nose pliers in my tool kit!
Putting the new ones back in, was easier, I used a deep reach socket and a very small hammer.
john s
They say an apple a day keeps the doctor away...
but now that most of them are muslim, I find bacon and sausages work better!
but now that most of them are muslim, I find bacon and sausages work better!
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
You disgust me!smiffy wrote: I used a deep reach socket and a very small hammer.
john s
There is NO place in a mans toolkit for a very small hammer...
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
- David
- Part of the decor
- Posts: 1102
- Joined: 29 May 2007
- Location: Lo-ca-tion: a place of settlement, activity, or residence; act of locating; state of being located.
Not even for banging in very small nails (or tacks)?*docchevron1472 wrote:There is NO place in a mans toolkit for a very small hammer...
*Granted though, it's not essential. Last furniture tacks I nailed in using a 2.5lb clubhammer.
... all landings are in fact controlled crashes, and any crash you can walk away from is a good landing. The definition of a good pilot is a man with the same number of landings as take-offs.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
See, thats the stuff! Big hammers FTW.
And no John, it would make no difference if you were a real man, there's simply no excuse, man or no man, get a bigger hammer!
And no John, it would make no difference if you were a real man, there's simply no excuse, man or no man, get a bigger hammer!
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.